fitup growing line,
1200T growing line,
offshore windmill growing line
Offshore Windmill 1200t 1 Power 2 Idler Hydraulic Fitup Growing Line
Offshore Windmill 1200t Welding Roller Rotator 1Power 2Idler Hydraulic Fitup Growing Line
Welding roller rotator with turning capacity of 1200t/power rotator.
1power rotator & 2 hydraulic idler rotator using for 1200t gaint column fitup/growing line.
Mainly using for offshore wind mill monopile, also using for petrochemical column/refiner etc industries.
- 1200t welding roller rotator is composed by power rotator & hydraulic idler rotator.
- Power rotator turning capacity is 1200t/pc. Each rotator working load limit is 700t/pc.
- Idler rotator wheels are hydraulic cylinder driven, via which extention/redraw to adjust the column position
- With function of idler hydraulic jacking wheel, the monpile growing welding roller bed could aligning the sections to complete the fit up procedure.
- The welding roller rotator is conventional type with reserved screw on pedestal to adjust wheel center distance, so as to fit for diverse diameter MP
- Power welding roller rotator install with motorized bogie moving on the rail. Idler welding rotator with idler bogie.
- Extention funciton of linkage control with other equipments, realize automatic welding of circumferential seam
- Power rotator is double motor driven tow wheels with big & balance torque output of max 1200t turning capacity
- 42CrMo fored steel wheel, made for heavy duty gaint column/monopile.
- Hydraulic lifting idler with function of adjusting the workpiece position, suitable for welding seam alignment, easy for fitup/growing procedure.
- Motorized bogie moving along with the rail, realize ground logistic to decrease the hoist risk & make the transportation easy.
- Highly boosting the working efficiency & improve the product quality.
- Production according with mechanical standard JB/T 9187-1999.
||1200T welding roller rotator
||1drive unit + 3 hydrualic lift idler unit
|Work load limit
|Workpiece dia. range
Forged Steel roller.
|The distance between ground and rotator center
||1,850mm ( Return to zero point.)
|Roller center moving distance and adjustment method
1.The idler roller seat is fixed by bolts.
2.Adjust the center distance of the roller with bolt holes.
3.Roller seat moving distance is 150mm.
|Rotator walking method
1. One unit of rotator is electric walking and the other one is unpowered walking.
2. When the roller bed is walking, the maximum load is 1000 tons.
3. A group of rotator can move on the track at full load.
4. Electric walking speed is 230mm ~2300 mm/min
|Group pair lifting drive
1.Independent hydraulic station for each rotator.
2.Each hydraulic cylinder is equipped with an independent oil pressure gauge, and there is a comparison table of pressure-convertible load, which is recorded in the manual.
|Rotator control function
1.Low voltage (24V) wired (30M)/wireless remote control (100M).
2.Control cable length 30m, and must be provided a set control cable for spare parts.
3.The grounding of the electrical components of the control box must meet the electrical code requirements.
4.Cylinder lifting stroke and walking control.
5.Stop & E-stop button and synchronized function.
6.The remote control must have the above functions.
7.If the wireless remote control is damaged, it can use the wired control to operate.
8.Each hydraulic cylinder can operate independently and with linkage capability
|Electronic control part
1.Hydraulic station and power control box need to be protected.
(windproof, dustproof, waterproof)
2.Electronic control box and elements
can be fast disassembled.
3.The electronic control box and
components need to adapt to the
subtropical & island-type climate.
4.Perfect protection circuit
(windproof, dustproof, waterproof).
|Electronic components brand
|Transmission & gap protection
||Windproof, dustproof, waterproof.
|Rotator weight and lifting method
1.The weight of the rotator must be clearly marked on the drawing and sprayed on the rotator.
2.The rotator needs to provide and set the ideal lifting position and method and mark it on the drawing
|Rotator stabilization and anti-roll device
1.Set holding track device, the design drawings must be provided and recorded in the manual.
2.A stable device in contact with the ground is required at the periphery of the rotator.
3.When the rotator is fully loaded and not moving, the rotator can be stabilized.
|Linkage between rotator and welder
||If necessary, rotator manufacturer should open the roller bed system and cooperate with the welding manufacturer to integrate system.
||Need to set up a variety of protection devices, such as ELCB, Electrical fuse, and so on.
||1.Must be used international label.
1.All metal surfaces must be sandblasted
and painted to SSPC-Sa2.5.
2.Zinc primer coat 1 layer (75 μm / 1 layer) and finish coat 2 layer(250 μm / 2 layer).
3.Paint color: Green - RAL6011.
Points you may concern:
Customization - Can your machine or other products be customized?
Ronniewell: Sure. As a professional manufacturer, we have our own engineer team, who is good at design, develop & build special solution catering for your individual requirement.
Transportation-What about the transportation?
Ronniewell: Seaway is the most common transportation way for oversea trading. Depends on your location, combined transport by rail and sea is also an option. Certainly railway transportation is also acceptable if it is the most suitable approach.
After sale service - What about the after-sale service?
Ronniewell: We provide 12month guaranty period for the whole machine quality. During this time, any issue proved because of the machine flaw itself,we would take the whole responsibility of it. Except of the guaranty period,technical advisory support is available freely covering the whole using life of the machine. Engineer service on user premises is also available for necessary.
Welcome to follow us on following social media:
Name of the machine:
welding turning rolls, welding roller, tank turning rolls, pipe turning rolls, tube turning rolls,fit up rotator, self-aligned welding turning roll, self-aligning welding turning roll, self,adjustable welding turning roll, self aligned roller stand, wheel frame, roller frame for wind tower welding, automatic adjustable welding pipe rotator, conventional welding,turning roll, bolt adjustable welding turning roll, sand blasting rotator, painting rotator,welding turning roll, pipe welding turning roll, pipe turning rolls, 1+1 hydraulic fit up rotator, two in one fit up station, offshore foundation, offshore wind power, offshore wind tower, sucktion bucket, suction bucket jacket, sucktion bucket fabrication, sucktion bucket production equipment,