|Equipment:||1000t Fitup Welding Rotator||Structure:||Motorized Mobile On The Rail|
|Work Load Limit:||1000t/pair (1power & 1idler)||MP Dia. Range:||2000mm~8000mm|
|Idler:||With Hydraulic Lifting Cylinder||Wheel Material:||Forged Steel|
|Control:||Wireless Remote Controller||Power Supply:||Fit For Local Standard|
Offshore Wind Tower Production Line,
1000t Welding Rotator,
Monopile Wind Tower Production Line
Offshore Wind Monopile Final Assembling Production Line 1000t Fit Up Welding Rotator
Main technical parameters
|Equipment||1000T offshore monopile fit up welding rotator|
|Composed||1drive unit + 1idler unit (hydraulic lift)|
|Max. Loading capacity||1000Ton (1power & 1idler)|
|Workpiece dia. range||ø2,000~ø8,000mm.|
|Wheel material||Forged steel|
|Roller center moving distance and adjustment method||
1.The idler roller seat is fixed by bolts.
2.Adjust the center distance of the roller with bolt holes.
|Rotator walking method||
1. One unit of rotator is electric walking and the other one is unpowered walking.
2. When the roller bed is walking, the maximum load is 1000 tons.
3. A group of rotator can move on the track at full load.
4. Electric walking speed is 230mm ~2300 mm/min
|Group pair lifting drive||Hydraulic.|
1.Independent hydraulic station for each rotator.
2.Each hydraulic cylinder is equipped with an independent oil pressure gauge, and there is a comparison table of pressure-convertible load, which is recorded in the manual.
|Rotator control function||
1.Low voltage (24V) wired (30M)/wireless remote control (100M).
2.Control cable length 30m, and must be provided a set control cable for spare parts.
3.The grounding of the electrical components of the control box must meet the electrical code requirements.
4.Cylinder lifting stroke and walking control.
5.Stop & E-stop button and synchronized function.
6.The remote control must have the above functions.
7.If the wireless remote control is damaged, it can use the wired control to operate.
8.Each hydraulic cylinder can operate independently and with linkage capability
|Electronic control part||
1.Hydraulic station and power control box need to be protected.
(windproof, dustproof, waterproof)
2.Electronic control box and elements
can be fast disassembled.
3.The electronic control box and
components need to adapt to the
subtropical & island-type climate.
4.Perfect protection circuit
(windproof, dustproof, waterproof).
|Rotator stabilization and anti-roll device||
1.Set holding track device, the design drawings must be provided and recorded in the manual.
2.A stable device in contact with the ground is required at the periphery of the rotator.
3.When the rotator is fully loaded and not moving, the rotator can be stabilized.
What Ronniewell can do for Ronniewell customers:
Points you may concern:
Customization - Can your machine or other products be customized?
Ronniewell: Sure. As a professional manufacturer, we have our own engineer team, who is good at design, develop & build special solution catering for your individual requirement.
Transportation-What about the transportation?
Ronniewell: Seaway is the most common transportation way for oversea trading. Depends on your location, combined transport by rail and sea is also an option. Certainly railway transportation is also acceptable if it is the most suitable approach.
After sale service - What about the after-sale service?
Ronniewell: We provide 12month guaranty period for the whole machine quality. During this time, any issue proved because of the machine flaw itself,we would take the whole responsibility of it. Except of the guaranty period,technical advisory support is available freely covering the whole using life of the machine. Engineer service on user premises is also available for necessary.
Welcome to follow us on following social media:
Name of the machine:
welding turning roll, pipe welding turning roll, pipe turning rolls, welding turning rolls, welding roller, welding turning rolls, pipe turning rolls, tube turning rolls, fit up rotator, self-aligned welding turning roll, self-aligning welding turning roll, self adjustable welding turning roll, self aligned roller stand, wheel frame, roller frame for wind tower welding, automatic adjustable welding pipe rotator, conventional welding turning roll, bolt adjustable welding turning roll, sand blasting rotator, painting rotator, 1+1 hydraulic fit up rotator, two in one fit up station
Contact Person: Lu